很遺憾,因您的瀏覽器版本過低導致無法獲得最佳瀏覽體驗,推薦下載安裝谷歌瀏覽器!

极品粉嫩极品一线天视频,蜜臀AV午夜福利免费线观看,久久久国产一区二区三区,人人妻人人爽欧美成人一区

            高壓共軌試驗臺廠家

            公司: 泰安市實驗設備生產廠家
            聯系人: 陳經理
            手機: 13793823772
            地址: 山東泰安市岱岳經濟開發區泰肥一級路路南
            留言咨詢 更多信息
            分享:

            摘要

            泰安精動實驗設備有限公司為大家帶來關于高壓共軌試驗臺的使用保養的詳細介紹,并圖文并茂的給大家展示了噴油泵試驗臺的使用,預知詳情請點擊液壓泵試驗臺廠家的官方網站進行查詢吧。

            高壓共軌試驗臺廠家

            雙十二高壓共軌試驗臺廠家詳解相關的小知識為了適應不同客戶使用要求,為了使其更加人性化的操作,采用專用工業控制計算機和數字儀表獨立雙系統控制,互不影響。

            高壓共軌試驗臺的組成部分:

            設備主要由:高壓油泵、共軌腔及高壓油管、噴油器、電控單元、各類傳感器和執行器五個部分組成。試驗設備的每一個組成部分都是很關鍵的,就像人體的每一個部位,缺少哪一個環節都不可以。首先供油泵從油箱將燃油泵進入高壓油泵的進油口里面,由發動機驅動的高壓油泵將燃油增壓后送入共軌腔內,再由電磁閥控制各缸噴油器在相應時刻噴油。 通過高壓油泵上的壓力調節電磁閥,可以根據要求對試驗腔內的油壓進行靈活調節,尤其優化了發動機的低速性能。

            高壓共軌試驗臺

            對于不同的高壓共軌試驗臺產品,可靠性試驗有多種分類方法:

            1. 在環境條件下來劃分,可分為包括各種應力條件下的模擬試驗和現場試驗; 

            2. 以試驗項目劃分,可分為環境試驗、壽命試驗、加速試驗和特殊試驗;

            3. 若按試驗目的來劃分,則可分為篩選試驗、鑒定試驗和驗收試驗; 

            4. 若按試驗性質來劃分,也可分為破壞性試驗和非破壞性試驗兩大類。

            高壓共軌試驗臺的使用保養:

            1、控制儀的使用很關鍵,不要投擲、跌落或踩踏控制儀,避免控制儀受到強烈的外力撞擊;

            2、使用過程中避免將異物插入控制儀的連接器部分;

            3、保養維護很關鍵,請勿將水或其它液體流入到控制儀內部或控制儀上;

            4、請勿用濕手觸摸交流電源線端子,這樣會發生不必要危險

            5、如果灰塵或異物堆積在交流電源的端子周圍,要及時清理。灰塵長期堆積,會導致火災或造成觸電;

            6、請避免踩到或擠壓交流電源線,會使設備的運行產生阻礙。

            7、清潔控制儀時請拔掉電源線,避免觸電的危險。

            高壓共軌試驗臺

            以上的關共軌試驗臺的知識您了解了嗎?

            泰安精動試驗設備有限公司是集高壓共軌試驗臺,噴油泵試驗臺液壓油缸試驗臺科研、生產、銷售、服務于一體的現代化高科技企業。價格合適,公司多年來與海內外同行業、高等院校研究機關、研究所廣泛合作,成功開發了多種型號的設備,產品質量值得您的信任。如想了解很多的內容,詳情進入網站了解。

            In order to adapt to the use requirements of different customers and make its operation more humanized, the manufacturer of the double 12 high-voltage common rail test-bed adopts the independent dual system control of special industrial control computer and digital instrument, which does not affect each other.

            Components of high voltage common rail test bench:

            The test-bed is mainly composed of five parts: high-pressure oil pump, common rail cavity and high-pressure oil pipe, fuel injector, electronic control unit, various sensors and actuators. Every component of the test equipment is very critical, just like every part of the human body, it is impossible to lack any link. First, the fuel pump from the fuel tank enters the fuel inlet of the high-pressure oil pump. The high-pressure oil pump driven by the engine pressurizes the fuel and sends it into the common rail cavity. Then, the solenoid valve controls the fuel injector of each cylinder to inject fuel at the corresponding time. Through the pressure regulating solenoid valve on the high-pressure oil pump, the oil pressure in the test chamber can be flexibly adjusted according to the requirements, especially the low-speed performance of the engine is optimized.

            For different high-voltage common rail test bench products, there are many classification methods for reliability test:

            1. Divided under environmental conditions, it can be divided into simulation tests and field tests under various stress conditions;

            2. Divided by test items, it can be divided into environmental test, life test, accelerated test and special test;

            3. If it is divided according to the purpose of the test, it can be divided into screening test, identification test and acceptance test;

            4. If divided according to the nature of the test, it can also be divided into destructive test and non-destructive test.

            Use and maintenance of high pressure common rail test bench:

            1. The use of the controller is very important. Do not throw, fall or step on the controller to avoid strong external force impact on the controller;

            2. Avoid inserting foreign matters into the connector of the controller during use;

            3. Maintenance is very important. Do not let water or other liquids flow into the controller or onto the controller;

            4. Do not touch the AC power line terminal with wet hands, which will cause unnecessary danger

            5. If dust or foreign matters accumulate around the terminals of the AC power supply, they should be cleaned in time. Long term accumulation of dust will cause fire or electric shock;

            6. Please avoid stepping on or squeezing the AC power line, which will hinder the operation of the equipment.

            7. Please unplug the power cord when cleaning the controller to avoid the risk of electric shock.

            Do you understand the above knowledge about common rail test bench?

            Tai'an Jingdong Test Equipment Co., Ltd. is a modern high-tech enterprise integrating scientific research, production, sales and service of high-pressure common rail test bench, fuel injection pump test bench and hydraulic cylinder test bench. The price is appropriate. Over the years, the company has cooperated extensively with the same industry at home and abroad, research institutions of colleges and universities, and research institutes, and has successfully developed a variety of models of equipment. The product quality is worthy of your trust. If you want to know a lot of content, please go to the website for details.

            英文由百度翻譯,僅供參考。

            更多>>

            相關推薦

            • 高壓共軌試驗臺

            • 高壓試驗臺

            • JD-GLP-B 高壓共軌試驗臺

            • CRS-708高壓共軌試驗臺

            泰安市精動實驗設備有限公司 咨詢熱線:13793823772 位于山東泰安泰山腳下,主導產品為噴油泵試驗臺高壓共軌試驗臺生產工藝及技術力量雄厚,目前生產的:液壓泵試驗臺電控試驗臺電噴試驗臺共軌油嘴試驗臺液壓油缸試驗臺工程車油泵馬達試驗臺泵車油泵馬達試驗臺12psb噴油泵試驗臺船用泵試驗臺CRS試驗臺校泵臺轉向機試驗臺等產品銷往全國各地,出口國外100多個國家和地區。產品實行三包,代辦運輸,提供技術咨詢。

            CopyRight ? 版權所有: 泰安市精動實驗設備有限公司 技術支持:佰搜網 0538-7177991 網站地圖 XML 備案號:魯ICP備13024678號-5

            本站關鍵字: 油泵試驗臺 高壓試驗臺 液壓試驗臺 高壓共軌試驗臺 噴油泵試驗臺 液壓缸試驗臺 機油泵試驗臺 CRS電噴試驗臺


            噴油泵試驗臺廠家