下面的內容是對于噴油泵試驗臺的適用場合的事項闡述，所展示的噴油泵試驗臺圖片都是現場拍攝，提供的內容都是經過泰安精動實驗設備有限公司高壓共軌試驗臺廠家經驗所得，請點擊進入查看更多機油泵試驗臺的相關行業信息吧。

噴油泵試驗臺的適用場合：

油泵試驗臺作為常見的一種調試試驗設備，在噴油泵的生產與維修中發揮著關鍵的作用。依據占有市場份額較大的機械式噴油系統，廠家特別研發了12psb噴油泵試驗臺，該試驗臺適用于中國市場上所有直列式和分配式機械噴油泵。

噴油泵試驗臺特點：

1、轉速有十個檔位，可以隨時調節。

2、轉速、記數、溫度數字顯示，記錄方便

3、自動化程度高，燃油溫度可以進行自動控制

4、具有正負兩個系統，同時正負壓系統配有氣源

5、自帶12V/24V直流電源

6、保護功能齊全，具有過壓、過載、過熱保護功能

噴油泵試驗臺車間要求及安裝：

1、有的試驗臺是帶有燃油冷卻系統的，應將自來水管與燃油冷卻器連接，以便冷卻油溫。

2、12psb噴油泵試驗臺應該安裝在不受潮濕的環境下，不能靠近腐蝕氣體

3、噴油泵試驗臺應安裝在穩固的水平面上。要用水平儀找好水平位置進行安裝。

4、噴油泵試驗臺電機電源是三相四線電源，設備的機殼應良好接地。

5、試車啟動電動機前的檢查工作相當重要，仔細檢查各連接部分是否緊固可靠，萬向節螺釘堅固牢靠，要罩好防護罩。試驗臺在高速空轉時，要及時拆掉應萬向節，以防發生不必要的事故。

6、起動時，應特別注意供油泵的旋轉方向和泵旋向標牌所示的旋向一致。當供油泵的旋向反向時，應調整電源相位使其旋向正確。

7、噴油泵試驗臺試運轉前，在試驗臺上防銹油要仔細清除，并在需要注油的地方注入規定的油料。

噴油泵試驗臺發展趨勢：

(1)噴油泵試驗臺生產廠家生產的設備都是批量化的，因此，對于試驗臺的自動化程度要求也越來越高，如噴油泵快速裝夾具及噴油量快速數字化測量等；而維修行業則要求試驗臺應能適應多種噴油泵的調試，具備較齊全的附件。

(2)利用計算機測控技術在噴油泵試驗臺的技術上將會成為一種趨勢，使噴油泵調試中的各項條件和技術參數的測量完全以數字化方式進行自動測量，成為噴油泵產品技術及質量不斷提高的條件

關于噴油泵試驗臺的相關內容就先介紹到這里，泰安精動試驗設備廠是一家集高壓共軌試驗臺生產，噴油泵試驗臺銷售為一體的公司，多年來，致力于研究開發新型試驗設備，已取得突破性進展，試驗臺價格優惠，值得廣大客戶信賴。如想了解更多相關設備的介紹，可進入網站了解。

Applicable occasions of fuel injection pump test bench:

As a common debugging and testing equipment, fuel injection pump test-bed plays a key role in the production and maintenance of fuel injection pump. According to the mechanical fuel injection system with a large market share, the manufacturer of the fuel injection pump test bench has specially developed a 12psb fuel injection pump test bench, which is applicable to all in-line and distributed mechanical fuel injection pumps in the Chinese market.

Characteristics of fuel injection pump test bench:

1. The speed has ten gears, which can be adjusted at any time.

2. Speed, counting and temperature digital display, convenient for recording

3. The degree of automation is high, and the fuel temperature can be automatically controlled

4. It has positive and negative systems, and the positive and negative pressure system is equipped with air source

5. With 12v/24v DC power supply

6. The protection function is complete, with overvoltage, overload and overheating protection functions

Workshop requirements and installation of fuel injection pump test bench:

1. Some test benches are equipped with fuel oil cooling system, and the water pipe should be connected with the fuel oil cooler to cool the oil temperature.

2. 12psb fuel injection pump test bench should be installed in an environment free from moisture and should not be close to corrosive gases

3. The fuel injection pump test bench shall be installed on a stable horizontal plane. Use a level to find the horizontal position for installation.

4. The motor power supply of the fuel injection pump test bench is a three-phase four wire power supply, and the shell of the equipment should be well grounded.

5. The inspection work before commissioning and starting the motor is very important. Carefully check whether the connecting parts are fastened and reliable, the universal joint screws are firm, and the protective cover should be covered. When the test bench idles at high speed, the universal joint should be removed in time to prevent unnecessary accidents.

6. When starting, pay special attention to the rotation direction of the oil supply pump and the rotation direction shown on the pump rotation direction label. When the rotation direction of the oil supply pump is reversed, adjust the power phase to make it rotate correctly.

7. Before the test run of the fuel injection pump test bench, the antirust oil on the test bench shall be carefully removed, and the specified oil shall be injected into the place where oil injection is required.

Development trend of fuel injection pump test bench:

(1) The equipment produced by fuel injection pump test-bed manufacturers are all in batches, so the requirements for the automation of the test-bed are also higher and higher, such as rapid fixture installation of fuel injection pump and rapid digital measurement of fuel injection quantity; The maintenance industry requires that the test bench should be able to adapt to the commissioning of a variety of fuel injection pumps, with relatively complete accessories.

(2) The use of computer measurement and control technology in the fuel injection pump test-bed technology will become a trend, so that the conditions and technical parameters in the fuel injection pump commissioning are measured automatically in a digital way, which becomes the condition for the continuous improvement of the fuel injection pump product technology and quality

The relevant content of the fuel injection pump test-bed will be introduced here first. Tai'an Jingdong test equipment factory is a company integrating the production of high-pressure common rail test-bed and the sales of fuel injection pump test-bed. Over the years, it has been committed to the research and development of new test-bed equipment, and has made breakthrough progress. The price of the test-bed is preferential, which is worthy of the trust of our customers. If you want to know more about the relevant equipment, you can go to the website.

英文由百度翻譯，僅供參考。