摘要
本文詳細解決了液壓泵試驗臺的問題分析，所提供的內容有不足之處，歡迎大家留言反饋，更多高壓共軌試驗臺的施工方法我們會定期上傳，歡迎關注噴油泵試驗臺廠家官網。
JD-FXJ-I轉矩測試方向機試驗臺
產品介紹：
該轉向機試驗臺是根據汽車動力轉向器（俗稱液壓方向機）專用標準《QC/T306-1999汽車動力轉向控制閥總成臺架試驗方法》及《QC/T529-2000汽車動力轉向器總成臺架試驗方法》設計要求等相關標準。并依據動力轉向器和轉向助力泵所出現的故障而設計的，集動力轉向器及轉向助力泵維修、檢測為一體的動力轉向器綜合性能檢測臺。該檢測設備操作簡單、維護方便、檢測精度高。經本檢測臺檢測的動力轉向器和轉向助力泵合格率達到。
該方向機試驗臺采用油壓系統，主機變頻調速，轉速任意預置，數字表顯示，試驗油恒溫控制。
特點：
主要檢測方向機助力的對稱度，左右扭矩，內漏，轉向，單邊沉重。轉向助力泵的工作壓力，流量，密封性及相關閥的密封性等各種液壓轉向系統故障。采用液壓泵隨時可以調節液壓系統的工作狀況檢測元器件的各種參數。特別適應載重車輛液壓轉向及工作性能的檢測和試驗。該機采用壓力儀表顯示轉矩、工作壓力等各種參數。
調整項目：轉向沉重、沖擊振動、操縱不穩、轉向回跳、轉向噪聲、油液滲漏。
技術參數：
型號
功率(Kw)
電源(V)
計算機控制
轉速(r/mm)
溫控系統
液壓泵(MPa)
扭矩(N.m)
轉向圈數
轉角(oC)
FXJ-I
4
5.5
7.5380
220X
0-4000
√
0~15
0~4200
0~9999.9
±45
FXJ-II
√
0-4000
FXJ-III
X
0-4000
泰安市精動實驗設備有限公司-JD-FXJ-I轉矩測試轉向機試驗臺
Jd-fxj-i torque testing steering machine test bench
Product introduction:
The steering gear test bench is based on the design requirements of the special standards for automotive power steering gear (commonly known as hydraulic steering gear) "qc/t306-1999 bench test method for automotive power steering control valve assembly" and "qc/t529-2000 bench test method for automotive power steering gear assembly" and other relevant standards. According to the faults of power steering gear and power steering pump, a power steering gear comprehensive performance testing platform integrating the maintenance and testing of power steering gear and power steering pump is designed. The detection equipment has the advantages of simple operation, convenient maintenance and high detection accuracy. The qualified rate of power steering gear and power steering pump tested by this test bench is up to.
The steering machine test-bed adopts the oil pressure system, the main engine frequency conversion speed regulation, the speed is arbitrarily preset, the digital meter display, and the test oil constant temperature control.
characteristic:
It mainly detects the symmetry of steering machine power, left and right torque, internal leakage, steering, and unilateral heaviness. Various hydraulic steering system faults such as the working pressure, flow, tightness of the power steering pump and the tightness of the related valves. The working condition of the hydraulic system can be adjusted at any time by using the hydraulic pump to detect various parameters of components. It is especially suitable for the inspection and test of hydraulic steering and working performance of heavy-duty vehicles. The machine uses pressure instruments to display torque, working pressure and other parameters.
Adjustment items: heavy steering, shock vibration, unstable handling, steering rebound, steering noise, oil leakage.
英文由百度翻譯，僅供參考。
