運行技術不斷改進，各個液壓泵試驗臺廠家和維修行家對于設備的要求也不斷增高。用戶在使用設備的時候，燃油的溫度達到規定之后會自動啟動主機，然后進行驅動測試，測試完畢會自行運行。

JD-YB-II工控機液壓泵試驗臺

產品介紹：

　　本款液壓泵試驗臺主要檢測轉向助力泵及液壓齒輪泵的工作壓力，流量，密封性及相關閥的密封性等各種液壓轉向系統故障。該機采用液壓泵隨時可以調節液壓系統的工作狀況檢測元器件的各種參數。特別適應載重車輛，農用機械液壓泵性能檢測。

特點：

　　01. 工控機電腦控制。

　　02. 主機變頻調速，輸出扭矩大

　　03. 試驗油恒溫控制

技術參數：

　　01. 電腦顯示：轉速、油溫、壓力、流量

　　02. 電源：380V/50Hz

　　03. 油泵：380V/50Hz

　　04. 功率：4KW

　　05. 轉速：0-4000r/min

　　06. 測量范圍：0-25MPa

　　07. 流量檢測

　　08. 凈重：600Kg

　　09. 凈尺寸：1600X1300X1500mm

　　10. 可選配置：

　　01. 電源：根據要求

　　02. 功率：根據要求.

泰安市精動實驗設備有限公司-JD-YB-II工控機液壓泵試驗臺

了解液壓泵試驗臺的概況：

試驗臺是對液壓機進行檢測、調整和維修的設備，近幾年來，隨著液壓機的廣泛應用，運行技術不斷改進，各個液壓泵試驗臺廠家和維修行家對于設備的要求也不斷增高。用戶在使用設備的時候，燃油的溫度達到規定之后會自動啟動主機，然后進行驅動測試，測試完畢會自行運行。如果大家還想了解更多有關液壓泵試驗臺價格或是高壓試驗臺廠家的問題，歡迎關注泰安精動實驗設備有限公司。

Jd-yb-ii industrial computer hydraulic pump test bench

Product introduction:

This hydraulic pump test-bed mainly detects various hydraulic steering system faults such as the working pressure, flow, tightness of power steering pump and hydraulic gear pump and the tightness of related valves. The machine adopts a hydraulic pump, which can adjust the working condition of the hydraulic system at any time and detect various parameters of components. It is especially suitable for testing the performance of hydraulic pumps of heavy-duty vehicles and agricultural machinery.

characteristic:

01. Industrial computer computer control.

02. The main engine is variable frequency speed regulation, and the output torque is large

03. constant temperature control of test oil

Technical parameters:

01. Computer display: speed, oil temperature, pressure, flow

02. Power supply: 380v/50hz

03. oil pump: 380v/50hz

04. power: 4kw

05. Speed: 0-4000r/min

06. Measurement range: 0-25mpa

07. Flow detection

08. Net weight: 600kg

09. Net size: 1600x1300x1500mm

10. Optional configuration:

01. power supply: as required

02. Power: as required

Tai'an Jingdong Experimental Equipment Co., Ltd. - jd-yb-ii industrial computer hydraulic pump test bench

Understand the overview of hydraulic pump test bench:

Hydraulic pump test-bed is an equipment for testing, adjusting and maintaining hydraulic press. In recent years, with the wide application of hydraulic press and the continuous improvement of operation technology, the requirements of various hydraulic pump test-bed manufacturers and maintenance experts for equipment are also increasing. When using the equipment, the user will automatically start the host after the fuel temperature reaches the specified value, and then carry out the drive test. After the test, it will run by itself. If you want to know more about the price of hydraulic pump test bench or the manufacturer of high-pressure test bench, please pay attention to Tai'an Jingdong Experimental Equipment Co., Ltd.

英文由百度翻譯，僅供參考。