摘要
本文詳細解決了JD-IV 工作站噴油泵試驗臺的問題分析，所提供的內容有不足之處，歡迎大家留言反饋，更多高壓共軌試驗臺的施工方法我們會定期上傳，歡迎關注液壓油泵試驗臺廠家官網。
共軌油嘴試驗臺
產品介紹：
JD-IV 工作站噴油泵試驗臺變頻調速，轉速任意預置，15'液晶真彩色顯示，工業嵌入式計算機主板，計算機和數字表雙控雙顯，特大數碼管顯示轉速、計數，兩側按鍵，操作更方便，計算機和數字表顯示轉速、計數、油溫、提前角度、檔位。
功能介紹：
01. 測試不同轉速下的各缸供油量
02. 靜態檢查各缸供油的時間
03. 檢查調速器性能
04. 分配泵電磁閥的試驗
05. 檢查氣動調速器性能
06. 檢查增壓補償器性能
07. 檢查分配泵的輸油供油能力
08. 測量分配泵泵體內壓
09. 檢查氣膜調速器負壓性能
10. 進行噴油泵的密封性試驗
11. 測量提前器提前角度
主要技術參數：
01.量筒：45ml量筒兩套；
02.燃油箱容積：60L；
03.油溫自動控制：40±2℃；
04.試驗油濾油精度：5μ；
05.直流電壓12V和24V；
06.供油壓力：低壓：0~0.4Mpa，高壓：0~4Mpa;
07.泵體內壓顯示：0~0.16Mpa及0~1.6Mpa；
08.氣壓顯示：正壓：0~0.3Mpa負壓：-0.03~0Mpa；
09.轉速預置：0~4000RPM可任意預置；
10.中心高：125MM；
11.飛輪慣量：0.8KG.M2;
12.輸出功率：11-55KW
泰安市精動實驗設備有限公司-JD-IV 工作站噴油泵試驗臺
Product introduction:
The main machine of this test-bed has variable-frequency speed regulation, arbitrary preset speed, 15'LCD true color display, industrial embedded computer motherboard, dual control and dual display of computer and digital meter, super large digital tube to display speed and count, buttons on both sides, which is more convenient to operate, and computer and digital meter to display speed, count, oil temperature, advance angle and gear.
Function introduction:
01. Test the oil supply of each cylinder at different speeds
02. Statically check the oil supply time of each cylinder
03. Check the governor performance
04. test of distribution pump solenoid valve
05. Check the performance of pneumatic governor
06. Check the performance of boost compensator
07. Check the oil delivery capacity of the distribution pump
08. Measure the internal pressure of the distribution pump
09. Check the negative pressure performance of the air film governor
10. Conduct the sealing test of the fuel injection pump
11. Measure the advance angle of the advancer
Main technical parameters:
01. Measuring cylinder: two sets of 45ml measuring cylinders;
02. Fuel tank volume: 60L;
03. Automatic oil temperature control: 40 ± 2 ℃;
04. Oil filtering accuracy of test oil: 5 μ；
05. DC voltage 12V and 24V;
06. Oil supply pressure: low pressure: 0~0.4mpa, high pressure: 0~4mpa;
07. Pump body pressure display: 0~0.16mpa and 0~1.6mpa;
08. Air pressure display: positive pressure: 0~0.3mpa negative pressure: -0.03~0mpa;
09. Speed preset: 0~4000rpm can be preset arbitrarily;
10. Center height: 125mm;
11. Flywheel inertia: 0.8kg.m2;
12. Output power: 11-55kw
Tai'an Jingdong Experimental Equipment Co., Ltd. - jd-iv workstation fuel injection pump test bench
英文由百度翻譯，僅供參考。
