摘要
泰安精動實驗設備有限公司為大家帶來關于噴油泵試驗臺的產品介紹，并圖文并茂的給大家展示了12psb噴油泵試驗臺產品的使用，預知詳情請點擊機油泵試驗臺廠家的官方網站進行查詢吧。
JD-I 液晶工控工作站噴油泵試驗臺
噴油泵試驗臺的產品介紹：
噴油泵試驗臺主機變頻調速，轉速任意預置，15'液晶真彩色顯示，工業嵌入式計算機主板，計算機和數字表雙控雙顯，特大數碼管顯示轉速、計數，兩側按鍵，操作更方便，計算機和數字表顯示轉速、計數、油溫、提前角度、檔位。
功能介紹：
01. 測試不同轉速下的各缸供油量
02. 靜態檢查各缸供油的時間
03. 檢查調速器性能
04. 分配泵電磁閥的試驗
05. 檢查氣動調速器性能
06. 檢查增壓補償器性能
07. 檢查分配泵的輸油供油能力
08. 測量分配泵泵體內壓
09. 檢查氣膜調速器負壓性能
10. 進行噴油泵的密封性試驗
11. 測量提前器提前角度
主要技術參數：
01.量筒：45ml量筒兩套；
02.燃油箱容積：60L；
03.油溫自動控制：40±2℃；
04.試驗油濾油精度：5μ；
05.直流電壓12V和24V；
06.供油壓力：低壓：0~0.4Mpa，高壓：0~4Mpa;
07.泵體內壓顯示：0~0.16Mpa及0~1.6Mpa；
08.氣壓顯示：正壓：0~0.3Mpa負壓：-0.03~0Mpa；
09.轉速預置：0~4000RPM可任意預置；
10.中心高：125MM；
11.飛輪慣量：0.8KG.M2;
12.輸出功率：11-55KW
泰安市精動實驗設備有限公司,JD-I 液晶工控工作站噴油泵試驗臺
Product introduction of fuel injection pump test bench:
The main engine of the fuel injection pump test-bed is variable-frequency speed regulation, the speed is arbitrarily preset, the 15'liquid crystal true color display, the industrial embedded computer motherboard, the computer and digital meter double control and double display, the extra large digital tube displays the speed and count, and the keys on both sides are more convenient to operate. The computer and digital meter display the speed, count, oil temperature, advance angle and gear.
Function introduction:
01. Test the oil supply of each cylinder at different speeds
02. Statically check the oil supply time of each cylinder
03. Check the governor performance
04. test of distribution pump solenoid valve
05. Check the performance of pneumatic governor
06. Check the performance of boost compensator
07. Check the oil delivery capacity of the distribution pump
08. Measure the internal pressure of the distribution pump
09. Check the negative pressure performance of the air film governor
10. Conduct the sealing test of the fuel injection pump
11. Measure the advance angle of the advancer
Main technical parameters:
01. Measuring cylinder: two sets of 45ml measuring cylinders;
02. Fuel tank volume: 60L;
03. Automatic oil temperature control: 40 ± 2 ℃;
04. Oil filtering accuracy of test oil: 5 μ；
05. DC voltage 12V and 24V;
06. Oil supply pressure: low pressure: 0~0.4mpa, high pressure: 0~4mpa;
07. Pump body pressure display: 0~0.16mpa and 0~1.6mpa;
08. Air pressure display: positive pressure: 0~0.3mpa negative pressure: -0.03~0mpa;
09. Speed preset: 0~4000rpm can be preset arbitrarily;
10. Center height: 125mm;
11. Flywheel inertia: 0.8kg M2;
12. Output power: 11-55kw
Tai'an Jingdong Experimental Equipment Co., Ltd., jd-i LCD industrial control workstation fuel injection pump test bench
英文由百度翻譯，僅供參考。
