本文詳細解決了190大功率專用試驗臺特點的問題分析，所提供的內容有不足之處，歡迎大家留言反饋，更多噴油泵試驗臺的施工方法我們會定期上傳，歡迎關注泰安精動實驗設備有限公司高壓共軌試驗臺廠家官網。

了解噴油泵試驗臺：

一、 泰安精動JD-D濟柴190型單體泵大功率試驗臺采用的交流變頻調速技術，具有優異的調速性能，轉速可以預置、無級調速、油溫、轉速、記數采用數字顯示，倒油聲光報時。該試驗臺可以調整、試驗國內外各種內燃機車柴油機噴油泵及相應船用柴油機噴油泵，是一種使用范圍廣、大功率的單體泵試驗臺。

二、具體功能：

1.測試不同轉速下的各缸供油量；

2.靜態檢查各缸供油時間；

3.檢查機械調速器性能；

4.分配泵電磁閥的試驗；

5.檢查氣動調速器性能；

6.檢查壓力補償器性能；

7.分配泵回油量測量；

8.測量分配泵泵體內壓；

9.檢查氣膜調速器負壓性能；

10.測量齒條行程；

11.進行噴油泵密封性能試驗；

12.測試噴油泵提前角功能；

13.檢測濟柴12V190高壓油泵的各項性能.

三、特點：

1.190大功率專用試驗臺有獨立可移動性操作平臺系統；

2.三“T”型槽超大工作臺；

3.獨立可移動集油系統；

4.獨立強制潤滑系統；

5.轉速、計數、溫度、氣壓等均由實時測量控制

6.帶有新型高壓油泵數據資料；

7.可以在油泵數據庫中迅速查找指定油泵的調試數據；

8.自帶氣源；  

9.所有測試數據可生成；  

10.主機變頻調速，輸出扭矩大，降速值小；

11.精度高，節能；  

12.具有油位顯示和報警功能；

四、主要技術參數：

1.量筒：150/260CC各一套；

2.燃油箱容積：75L；

3.油溫自動控制：40±2℃；    

4.試驗油濾油精度：5μ；

5.直流電壓12V和24V；      

6.供油壓力：低壓：0~0.4Mpa，高壓：0~4Mpa;

7.泵體內壓顯示：0~0.16Mpa及0~1.6Mpa；

8.氣壓顯示：正壓：0~0.3Mpa負壓：-0.03~0Mpa；

9.轉速預置：0~4000RPM可任意預置；

10.齒條行程量程：0~25MM；

11.中心高：125MM；

12.飛輪慣量：0.8KG.M2;

13.輸出功率：30KW-55KW等；

泰安市精動實驗設備有限公司,190大功率專用試驗臺

Understand the fuel injection pump test bench:

1、 The AC variable-frequency speed regulation technology adopted by Taian Jingdong jd-d jichai 190 single pump high-power test-bed has excellent speed regulation performance. The speed can be preset, stepless speed regulation, oil temperature, speed and counting adopt digital display, and oil pouring acousto-optic timing. The test-bed can adjust and test all kinds of diesel locomotive diesel engine fuel injection pumps at home and abroad and the corresponding marine diesel engine fuel injection pumps. It is a unit pump test-bed with wide application range and high power.

2、 Specific functions:

1. Test the oil supply of each cylinder at different speeds;

2. Statically check the oil supply time of each cylinder;

3. Check the performance of mechanical governor;

4. Test of distribution pump solenoid valve;

5. Check the performance of pneumatic governor;

6. Check the performance of pressure compensator;

7. Measurement of oil return volume of distribution pump;

8. Measure the internal pressure of the distribution pump;

9. Check the negative pressure performance of the air film governor;

10. Measure the rack stroke;

11. Conduct sealing performance test of fuel injection pump;

12. Test the advance angle function of fuel injection pump;

13. Check the performance of jichai 12V190 high pressure oil pump

3、 Features:

1.190 the high-power special test bench has an independent mobile operation platform system;

2. Three "t" groove super large workbench;

3. Independent movable oil gathering system;

4. Independent forced lubrication system;

5. Speed, counting, temperature, air pressure, etc. are all controlled by real-time measurement

6. With data of new high-pressure oil pump;

7. It can quickly find the commissioning data of the specified oil pump in the oil pump database;

8. Self contained air source;

9. All test data can be generated;

10. The frequency conversion speed regulation of the host has large output torque and small deceleration value;

11. High precision and energy saving;

12. It has oil level display and alarm functions;

4、 Main technical parameters:

1. Measuring cylinder: one set of 150/260cc each;

2. Fuel tank volume: 75L;

3. Automatic oil temperature control: 40 ± 2 ℃;

4. Oil filtering accuracy of test oil: 5 μ；

5. DC voltage 12V and 24V;

6. Oil supply pressure: low pressure: 0~0.4mpa, high pressure: 0~4mpa;

7. Pump body pressure display: 0~0.16mpa and 0~1.6mpa;

8. Air pressure display: positive pressure: 0~0.3mpa negative pressure: -0.03~0mpa;

9. Speed preset: 0~4000rpm can be preset arbitrarily;

10. Rack stroke range: 0~25mm;

11. Center height: 125mm;

12. Flywheel inertia: 0.8kg.m2;

13. Output power: 30kw-55kw, etc;

Tai'an Jingdong Experimental Equipment Co., Ltd., 190 high-power special test bench

英文由百度翻譯，僅供參考。